Choose access equipment to suit the task, available space and storage. Start with a risk assessment, then check the instructions and specifications for the individual model.
Types at a glance
| Type | Key features | Before choosing |
|---|---|---|
Stepstools |
Compact access equipment for lower-level tasks. |
Check the permitted standing level, load capacity and suitability for the task. |
Stepladders / A-frame ladders |
A self-supporting design with steps, commonly folding for storage. |
Allow room for the ladder to open fully and engage its locking devices. Check the permitted standing level. |
Extension ladders |
Overlapping sections extend for greater reach and retract for storage. Used as leaning ladders against a suitable support. |
Check the extended and closed lengths, required section overlap, locks and securing arrangements. Do not assume adjustable feet are included. |
Combination ladders |
Can offer more than one configuration, such as a leaning ladder or stepladder, depending on the model. |
Use only configurations permitted by the manufacturer. Recheck locking mechanisms whenever the setup changes. Do not assume a ladder can form a scaffold or work platform. |
Roof ladders |
Specialist equipment intended for work on a roof slope. |
Check the model’s intended use and roof compatibility. Do not assume a roof ladder can replace an extension ladder, or vice versa. Roof access needs a separate assessment. |
Loft ladders |
Equipment intended for access through a loft opening. |
Check the opening dimensions, floor-to-floor height, clearance and installation instructions. |
Telescopic ladders |
Sections retract into a compact form. Operating procedures vary between models. |
Check every section’s locking mechanism before use. Follow the opening and closing instructions and keep fingers clear of closing sections. |
Ladder materials
| Material | What to consider |
|---|---|
Aluminium |
Often chosen for manageable weight. Metal conducts electricity: do not choose an aluminium ladder for electrical work. Check condition, intended use and load information. |
Fibreglass |
HSE identifies fibreglass as an example of a non-conductive ladder material for electrical work. This is not a guarantee of safety around electricity. Check the individual model’s rating, condition and instructions, and assess electrical hazards separately. |
Wood |
Check the manufacturer’s intended use, condition, weight and storage requirements. Do not assume material alone makes a ladder suitable for a particular task. |
Check before you buy
Compare permitted standing height, overall dimensions, storage length, weight, load capacity, intended use and the specific model’s standards information. Material or appearance alone does not establish suitability.
Safety guidance
This overview is not a substitute for a task-specific risk assessment, training or the manufacturer’s instructions. A ladder is not automatically the right equipment for every job at height.